SX300-V Industrial Vacuum Pump

The SX300-V Industrial Vacuum Pump is a compact, robust, and efficient system capable of recovering material via 25"hg of vacuum and delivering the same over 1000 metres (3000 feet). The SX300-V industrial vacuum pump does this through 100mm (4") suction and discharge lines, transferring up to 30m3/hour+ of oil sludge, mud slimes or coal slurry, whilst remaining a simple time saving one man operation. The SX300-V is capable of transferring almost any flow able material and with reduced performances parameters, some non-flow able products.



  • Simple manual or automatic operation

  • Fixed or mobile system

  • 100% air powered and operated

  • Low noise emission operation (<80 dba at 1m)

  • Intrinsically safe

  • Exhaust Relief System

  • High vacuum 25"hg+

  • Compact, robust design

  • 10+ year tank working life



  • Thickener muck out

  • Dam desilting

  • Clean-up of under belt spillage

  • Drive head or transfer point cleaning

  • Sump and pit cleaning

  • Effluent transfer, pond clearing

  • Rapid spillage recovery

  • High volume guck and slimes transfer

  • Hazardous waste recovery / capture and transfer


Basic technical information

  • Height 155cm (5'1")

  • Width 100cm (3'3")

  • Length 145cm (4'8")

  • Weight 820kgs (1804lbs)

  • Air consumption 400cfm @ 85psi+(optional 600cfm jet available)

  • Suction inlet 100mm (4")

  • Discharge outlet 100mm (4")

  • Handles solids to 70mm (3")

  • Fork skid mounted frame

  • Also available in both 316 stainless steel or Polyurethane coated